Easy Start Guide
About PowerPacket Utility
PowerPacket Utility is a Windows-based software application used to manage and
monitor the activity of HomePlug devices.
System Requirements
Your computer must meet the following requirements:
• Windows 98SE Me, 2000, XP (32 and 64 bit), or Vista (32 and 64 bit)
• Pentium III 300 MHz MMX-Compatible PC or greater
• 128MB hard disk space and memory
• CD-ROM drive
Installation
To install:
1. Insert the Resource CD that comes with HomePlug Turbo into the CD-ROM drive.
2. Click the Start button, then click Run.
3. In the Run dialog box, type D:\Setup.exe (where D: is your CD-ROM drive), and
then click OK.
4. Follow the instructions on the Utility.
Opening PowerPacket Utility
Two ways to open PowerPacket Utility:
• Click the Start button, click All Programs, click PowerPacket, click PowerPacket
Ethernet Adapter, and then click PowerPacket Utility.
• Right-click the PowerPacket Utility desktop icon and then select Open.
Page 10 of 18
To Next Page
Loading...
Need help?
General
