Easy Start Guide
2. Enter the Device Name.
3. Enter the Password. The Device Password is printed on the sticker label on the
HomePlug itself.
4. Click OK.
To scan for HomePlugs:
• Click Scan. By default, PowerPacket Utility scans devices from time to time.
Privacy
The Privacy tab provides a means for changing the Private Network Name of local or all
HomePlug devices within the network. A Private Network Name is composed of four to
24 alphanumeric case-sensitive characters.
HomePlug
is the default Private Network
Name.
Privacy
Page 13 of 18
To Next Page
Loading...
