11
STEP 1
Position the Docking Station on a smooth and
stable ground and plug the Docking Station’s
power adapter to its power outlet. You may
then switch ON the Aztech VC3000 and lodge
it into the Docking Station to begin charging the
vacuum cleaner.
Ensure to do the following:
For rst use/reuse (after a long period of rest),
charge the vacuum cleaner’s battery for at
least 16 hours. Do take note that you have to
SWITCH ON the Aztech VC3000 for it to start
charging.
Keep the Docking Station’s wiring tidily kept
and arranged in its wiring compartment
found on its back.
Both the Docking Station’s front (2 meters)
and sides (0.5 meters) should be free from
obstacles and or blockages which may
hinder the vacuum cleaner in locating and or
lodging into the Docking Station.
•
•
•
STEP 2
Correctly insert the needed batteries of the
Remote Control (2 x AAA) and the Virtual Wall
(2 x AA) and position the Virtual Wall on the
preferred location where you want to limit the
vacuum cleaner’s movement.
STEP 3
On the Aztech VC3000 or on its Remote
Control, press the AUTO button to begin
automatic cleaning. The Aztech VC3000 would
automatically return to its Docking Station to
charge itself once it runs out of batteries.
**OBSERVE BATTERY POLARITY
CONTROL
PANEL
REMOTE
CONTROL
To Next Page
Loading...
Need help?
General