7
AUTO. Press this button and the vacuum cleaner will start
automatic cleaning. During this mode, once the vacuum
cleaner’s battery becomes low, the vacuum cleaner will
automatically return to its Docking Station.
•
SPOT.
Press this button and the vacuum cleaner will enter
SPOT cleaning mode. During this mode, the vacuum
cleaner enters a 1m
2
range and will start cleaning this
area in an expanding spiral mode for 2 to 3 minutes.
•
NOTE: Touch any button on the vacuum cleaner’s control
panel to stop its cleaning operation.
Error Code Display. Displays different error codes
(provided in the TROUBLESHOOTING section of this
user manual) which corresponds to the current error(s)
encountered by the appliance.
•
ERROR DISPLAY
SCHEDULE INDICATOR. Indicates that you can now enter
the preferred cleaning schedule(s) using the Remote
Control. This LED automatically turns ON upon pressing
the button on the Remote Control.
•
UV MODE INDICATOR. Indicates that the vacuum cleaner’s
UV lamp is currently ENABLED or DISABLED By default, the
UV lamp feature is enabled, and the UV icon is ON.
•
GARBAGE INDICATOR.
Turns ON to indicate any of the
following:
The suction inlet of the vacuum cleaner is blocked by
dust
The dustbin has reached full capacity
The dirt sensor is covered by dust
•
»
»
»
DARK CLEANING MODE INDICATOR.
Indicates that the
vacuum cleaner has entered Dark Cleaning mode. This
LED automatically turns ON upon pressing the button
on the Remote Control.
•
DOCK. Press this button and the vacuum cleaner will
automatically locate its Docking Station to charge.
•
CLEANING MODE INDICATORS
VACUUM CLEANER BUTTONS
To Next Page
Loading...
Need help?
General