Azurite D32T - Call Log and Event History; Viewing Received and Dialled Calls

Call log
15
Viewing the received and dialled call
log
Go to CALLS / INCOMING CALLS or OUTGOING
CALLS.
The presentation screen for the last call received or
dialled appears.
This screen displays the following information
(depending on the service provider and subscription):
• the full name of your contact,
• the telephone number, date, time and duration of
the call.
The calls are organised in chronological order, from the
most recent call to the oldest call.You browse through
the log using  or  key.
By pressing Option , a list of various executable
actions appears:
- VIEW: to view the selected call again.
- CALL: to call the number.
- DELETE: to delete the call currently viewed.
- STORE NUMBER: to store the name and number in
the phonebook.
- SEND SMS: to send an SMS to your contact.
- DELETE ALL: to delete all calls.
Calling the last number dialled
(Redial)
From the idle screen, press and hold the green
key until the Call log screen appears.
Release , the last dialled number appears.
Press the green key again. The number is dialled
automatically.
Calling a number listed in the dialled
and received call log
Go to CALLS / INCOMING CALLS or OUTGOING
CALLS.
Browse through the log until the number you wish to
call is displayed.
Press the green key .
The number is dialled automatically.
The events log
Viewing the events log
If one or more new events occurred during your
absence, the information screen "NEW EVENTS !"
appears.
• If you do not wish to view the event log at this time,
press the red key .
• To view the event log, press .
A screen providing a summary the events which
occurred (SMS, miss calls, operator voice mail system)
while you were away is displayed.
Choose the event using  or . Press Valid. .
Activating/deactivating the new event
information screen
The new event information screen can be deactivated.
The events which have occurred can then be viewed in
the Calls Log/Event/View menu. The default setting is
active.
Go to CALLS / EVENTS / ACTIVATE
or DEACTIVATE.
If the "DEACTIVATE" option is set, you can view new
events as follows:
Select VIEW and press Valid. .
Select the event by pressing Valid. .
Call log
LU Azurite D32T- EN.book Page 15 Mercredi, 9. décembre 2009 2:37 14