Azurite D32T - Accessories; Alarm Clock; Timer

Accessories
16
Use this menu to access the following features:
• Alarm clock: to use your handset as an alarm
clock.
• Timer: to remind you of an event.
• Birthday: the handset will ring at the set date and
time to remind you of the name of the person to
whom you would like to wish happy birthday.
• Monitoring a room: use a handset to monitor a
room.
Alarm clock
When the alarm is triggered the selected ring tone
sounds for 60 seconds and an alert screen is displayed.
To turn off the alarm press any key on the handset.
Setting the alarm clock
Go to ACCESSORIES / ALARM.
An information screen shows the alarm clock status.
• To keep these settings, press Valid. .
• To change the alarm time or status,
press Edit .
Activating or deactivating the alarm clock
Select ACTIVATE or DEACTIVATE in the list. Press
Valid. .
The alarm settings information screen appears
showing the new status. Press Valid. .
Changing the alarm clock ring tone
To modify the alarm clock ring tone, select RING
TONE. Press Valid. .
Select the desired ring tone using  or .
Press Volume .
Press  or  to increase or decrease the volume.
Press Valid. .
An information screen shows the alarm clock settings,
press Valid. .
Modifying the alarm clock time
Select SET TIME. Press Valid. .
Enter the time at which you would like the alarm clock
to sound. Press Valid. .
Press Yes to activate the alarm.
Timer
The timer has a maximum setting of 99 minutes. Once
the specified time has elapsed, the handset rings for 60
seconds and the alarm screen is activated. Turn off the
alarm by pressing Stop . The handset stops
ringing.
Go to ACCESSORIES / TIMER.
• To start the timer without changing the displayed
delay, press Start .
• To change the programmed time, press Edit .
A list showing the different settings appears.
Changing the programmed time of the
timer
Select SET DURATION from the list. Press Valid. .
Enter the desired time (between 1 and 99 minutes).
Press Valid. .
Press Return to display the timer activation
screen.
The timer activation screen appears with the
modification. Press Start to start the timer.
Displaying or hiding the programmed
time of the timer
Select VIEW in the Timer menu using  or .
Press Valid. .
SHOW TIMER is displayed.
If you want to show the timer, press Yes else
press No .
Press Return .
If the alarm set occurs (wake up, timer,
anniversary and agenda) during a call, the
handset will ring at the end of the call.
If the timeout occurs whilst a call is in
progress the alarm will not sound until the
call is completed. For access to timer
adjustment you must stop it once it is
started.
Accessories
LU Azurite D32T- EN.book Page 16 Mercredi, 9. décembre 2009 2:37 14