Azurite D32T - Settings: PABX Prefix Configuration; Setting a PABX Prefix

Settings
23
The screen shows the new flash duration.
• To keep the duration, press Confirm .
• To modify the duration, press Edit .
Setting a PABX prefix
If you are connected to a PABX, you can program the
prefix required to obtain an external line.
With this function you can set the:
• PABX prefix number,
• dialled number length at which point the PABX
will be automatically dialled (this length is called
"digit before prefix"),
• prefix status (on or off).
Go to SETTINGS / ADVANCED SET. / SET LINE /
PABX PREFIX.
Press or key.
Press Yes , to modify this setting.
Select the required option:
- ACTIVATE / DEACTIVATE: to select a status.
- PREFIX: to enter the number giving you access to
the external line.
- EDIT LENGTH: to specify the «digits before prefix».
- EXIT PABX: to exit the menu.
To modify the prefix, select PREFIX, press Valid. .
Enter the prefix using the keypad, press Valid. .
To modify the digits before prefix, select
EDIT LENGTH., press Valid. .
Enter the digits before prefix using the keypad,
press Valid. .
LU Azurite D32T- EN.book Page 23 Mercredi, 9. décembre 2009 2:37 14