Need help?Do you have a question about the B. Braun Infusomat Space and is the answer not in the manual?
Explains the function of buttons, keys, and navigation elements on the device.
Details the device's ports and battery compartment access points.
Covers attaching the pole clamp, stacking pumps, and transport guidelines.
Explains how to mount the pump securely onto a pole.
Defines the system's purpose, applications, and patient population.
Provides initial guidelines for safe pump usage and positioning.
Details various safety measures during pump operation and line management.
Covers safety for enteral nutrition, transfusion, and accessories.
Outlines adherence to medical device safety standards like IEC/EN.
Specific safety instructions for Patient Controlled Analgesia and Target Controlled Infusion.
Further details on safely using the Target Controlled Infusion (TCI) mode.
Explains the function of each button and navigation key on the device.
Details the information shown on the device screen during operation.
Illustrates various screen displays and their meanings during operation.
Step-by-step guide for initiating an infusion therapy session.
Details the process of inserting the infusion line and priming it.
Explains how to set combinations of rate, volume, and time for infusions.
Describes the different ways to administer a bolus dose.
Instructions for replacing infusion lines and starting new therapies.
Steps to properly conclude an ongoing infusion.
Explains how to put the pump into standby mode.
How to check pump status while an infusion is active.
Changing rate, VTBI, or time without stopping the infusion.
Explains units for dosing and the formula for dose rate calculation.
Step-by-step guide for calculating the infusion rate based on dose parameters.
Information on storing and using drug data within the pump.
How to load drugs and manage therapy settings from the drug library.
Explains hard and soft limits for drug parameters in the library.
Guidance on setting up and using the PCA function.
Further information on PCA therapy, including status indicators and demand buttons.
Explains the TCI concept and pharmacokinetic models used.
Details the two TCI modes: plasma concentration and effect-site concentration targeting.
Lists pharmacokinetic parameters for Propofol and Remifentanil in TCI mode.
Shows default TCI drug list values and steps for pump setup.
Guides on entering patient data and setting the TCI target concentration.
Explains the TCI screen layout and how to access additional information.
Steps to end a Target Controlled Infusion session.
Information on the barcoding feature availability and activation.
Describes the piggyback mode for administering secondary infusions.
Visual guide showing the setup for piggyback infusions.
Explains gradual ramp-up and taper-down infusion profiles.
Guides on initiating Ramp and Taper modes via drug library or menu.
Details the taper phase and the function to end infusion early with a taper.
Explains how to set up infusions with multiple programmed intervals.
Details setting up and running the Program Mode therapy.
Describes the mode for repeated bolus and rate phases.
Guides on initiating and operating the Intermittent Mode therapy.
Explains administering a specific dose over a set time period.
Steps for setting up and initiating Dose Over Time infusions.
Details the Run Menu for controlling therapy and checking values.
How to adjust occlusion pressure levels to trigger alarms.
Explains the data lock function for unauthorized access protection.
Details the different security levels for the data lock feature.
Settings for bolus rate adjustment and Keep Vein Open mode.
Adjusting contrast, display brightness, and keypad lighting.
Configuring alarm sounds and device date/time.
Using macro mode to enlarge displayed infusion rate.
How to change the pump's display language.
Setting upstream pressure levels for occlusion detection.
Summarizes audible and optical signals for different alarm types.
Describes device alarms and procedures when they occur.
Explains pre-alarms and operating alarms, their causes, and responses.
Lists common causes for pre-alarm notifications.
Lists common causes for operating alarms that interrupt infusion.
Details alarms related to battery, drive, sensors, and air bubbles.
Explains alarms for flow issues, data resets, and data lock errors.
Describes reminder alarms and the conditions that trigger them.
Explains brief on-screen hints for improper entries.
Information on the battery type, capacity, and self-check indicators.
Advice for maximizing battery life and performance.
Details the process for cyclical battery maintenance to ensure capacity.
Details unit type, power supply, EMC, and operating/storage conditions.
Covers battery type, weight, dimensions, and preselection ranges.
Details rate increments, bolus accuracy, KVO rates, and computer connection.
Specifications for air detection sensitivity and occlusion pressure levels.
Outlines manufacturer's duties and the product warranty terms.
Information on available training and required safety checks.
Procedures for routine checks, cleaning, and proper disposal of the device.
Guidelines for checking the device upon delivery and before initial use.
Describes SpaceStation and SpaceCover for pump management.
Details PoleClamp, Power Supply, and Combi Lead for mounting and power.
Information on Drop Sensor and Short Stand accessories.
Details on battery packs and interface leads for connectivity.
Explains connection leads for power supply and staff call systems.
Provides technical data and wiring information for staff call integration.
Details the PCA kit, demand button, fixation methods, and cable management.
Lists recommended accessories and their article numbers.
Catalog of available IV-Standard, UV-protected, and Enteral Nutrition lines.
Lists specific lines for Neonate, Oncology, Piggyback, and CytoSets applications.
General| Device Type | Volumetric Infusion Pump |
|---|---|
| Power Supply | 100-240 V AC, 50/60 Hz |
| Flow Rate Accuracy | ±5% |
| Infusion Volume Range | 0.1 to 9999 mL |
| Battery Life | 8 hours at 25 mL/h |
| Display | LCD |
| Alarms | Air-in-line, Occlusion, End of Infusion, Standby, Low Battery, System Error, Door Open |
| Drug Library | Yes |
| Bolus Volume Range | 0.1 - 999.9 ml |
| Compatibility | Compatible with B. Braun SpaceStation |
To Next Page