Need help?Do you have a question about the B. Braun Vista basic and is the answer not in the manual?
General| Type | Infusion Pump |
|---|---|
| Manufacturer | B. Braun |
| Model | Vista basic |
| Flow Rate Range | 0.1 to 999 mL/h |
| Volume Range | 1 to 9999 mL |
| Accuracy | ±5% |
| Display | LCD |
| Compatibility | Standard infusion sets |
| Infusion Modes | Continuous |
| Power Supply | 100 – 240 V AC, 50/60 Hz |
| Alarms | Air-in-line, Occlusion, Low Battery |
| Weight | 4.4 lbs (2 kg) |
Covers service work, safety inspections, versions, revisions, and non-liability.
Details on training programs, ordering, and service support contacts.
Describes the physical components and layout of the unit.
Visual representation of the pump's operational sequence.
Details the dual microprocessor system and hardware control functions.
Explains the power sources and voltage generation within the unit.
Lists and defines various internal signals and their meanings.
Describes unit function when connected to mains power.
Covers battery operation, alarms, and the peristaltic pump unit.
Information on connecting the unit to external computer systems.
Details fm system integration and internal component layout.
Lists available languages and optional accessories with order numbers.
General maintenance procedures for the unit.
Procedures and requirements for technical safety inspections.
Detailed steps for performing unit inspections.
Guidelines for Electrostatic Discharge prevention.
Recommendations for setting up a safe workstation.
Information on revision docs, current info, and order forms.
Emphasizes that only trained technicians should perform repairs.
Guidelines on using only original spare parts and test equipment.
Explains the notation used for notes, cautions, and warnings.
Procedures and information for updating the unit's software.
Lists the officially recognized software versions for the unit.
Explains various error codes and alarm messages displayed by the unit.
Lists default settings for various functions and menus.
Overview diagram of the service program's functional groups.
Explains special functions enabled by a service plug.
Procedure to temporarily disable the occlusion sensor.
Instructions for activating and deactivating the service program.
Procedures for accessing and managing unit-specific data like drug names, serial numbers.
Procedures for accessing and managing historical data.
How to recall and manage the last 20 operating alarms.
Procedures for testing air, pressure, and temperature sensors.
Procedures for setting service/user language and alarm tone modes.
Procedures for testing and configuring staff call functions.
Procedures for activating/deactivating special functions.
Procedures for setting menu availability on the user interface.
Procedures for setting minimum and maximum delivery rates.
Procedures for adjusting air sensor sensitivity for alarms.
Covers setting Dianet display, priming volume, occlusion sensor, and scale factor.
Procedures for alignment and checking air sensor alarm threshold.
Procedures for setting occlusion threshold values (low/high).
Note on checking pump/controller board compatibility.
Procedures for activating or deactivating the history function.
Information and procedure for replacing mains fuses.
Information and procedure for replacing the unit's battery.
Information and procedure for replacing the door lock mechanism.
Information and procedure for replacing the pump cover.
Information and procedure for replacing the pump housing.
Information and procedure for replacing the housing and handle.
Information and procedure for replacing the controller board.
Information and procedure for replacing the rear panel assembly.
Procedures for replacing MFC board, fm plug, and equalization bolt.
Information and procedure for replacing the front panel assembly.
Information and procedure for replacing the pump unit assembly.
Information and procedure for replacing and calibrating the occlusion sensor.
Information and procedure for replacing and checking the air sensor.
To Next Page
