Need help?Do you have a question about the B. Braun Dialog+ and is the answer not in the manual?
General| Type | Hemodialysis Machine |
|---|---|
| Manufacturer | B. Braun |
| Model | Dialog+ |
| Dialysate Flow Rate | 300-800 ml/min |
| Blood Leak Detector | Yes |
| Air Detector | Yes |
| Conductivity Monitoring | Yes |
| Temperature Monitoring | Yes |
| Pressure Monitoring | Yes |
| Single-Needle Mode | Yes |
| Ultrafiltration Rate | 0 to 4.5 L/h |
| Treatment Modes | Hemodialysis (HD), Hemodiafiltration (HDF) |
| Power Supply | 230 V, 50/60 Hz |
| Connectivity | Ethernet, USB |
| Blood Flow Rate | 50-600 mL/min |
A detailed checklist for putting the machine into service, covering visual inspection, installation, and function tests.
Details self-tests for the SMPS-MC, covering service mode, battery, EEPROM, and buzzer functions.
Guides through the process of installing software versions LLC, LLS, and TLC using a USB stick.
Explains how to activate and start the TSM service program for machine maintenance.
Provides a comprehensive checklist for performing technical safety inspections and preventive maintenance.
Details the measurement circuits and procedures for ensuring electrical safety compliance.
Provides essential information on Electrostatic Discharge (ESD) protection and Electromagnetic Compatibility (EMC).
To Next Page