B. Braun Vista basic - Software; Software Update; Approved Software Versions

Software
Software Update
Designation Ord. No.
MFCinterface line cece eee 871 1661
The higher digit always replaces the lower digit for the revision
level, e.g. FVA23002 replaces IFVA23001.
When the software group changes (IFVA23002) the unit functions
are changed, too. Therefore unit users must be informed (e.g. in-
struct the user and exchang the instructions for use — software
coding, e.g. IFVA is on the cover page of the instructions for use.)
Note E =
Mark the unit after having updated the software! The new soft-
ware version must be clearly recognizable.
Only update from old to new software versions, never in reverse
order (e.g. neverupdate from IFVA23002 to IFVA230011).
All units used in one ward should have the same software status
and basic setup to avoidoperator mistakes.
“Note 0
Software updates must be reported to B. Braun for registration.
Observethenotes ofthe update programandthe supplements!
Approved Software Versions
Vista basic 950971 Rev A (5/04)
IFVA23002
- Basic software
IFVB23003