Need help?Do you have a question about the B. Braun PERFUSOR-secura FT and is the answer not in the manual?
General| Manufacturer | B. Braun |
|---|---|
| Model | PERFUSOR-secura FT |
| Power Supply | 100 - 240 V AC, 50/60 Hz |
| Type | Volumetric Infusion Pump |
| Infusion Rate Increment | 0.1 ml/h |
| Volume Range | 0.1 ml to 9999 ml |
| Display | LCD |
| Alarms | Occlusion, Air in line, End of infusion, Low battery |
Requirements and qualifications for performing service work on the device.
Recommendations for safety inspections and adherence to manual versions.
Disclaimer regarding liability for damages arising from manual usage.
Identification and numbering of the device's components and parts.
General description of the PERFUSOR® secura FT's functionality and features.
Essential safety precautions and guidelines for operating the device.
Concise step-by-step guide for basic operation of the device.
Details on using the device with battery power and its behavior during power failure.
List of common faults, their causes, and recommended troubleshooting steps.
Graphs illustrating the device's performance during initial operation at different rates.
Graphs illustrating flow deviations over time at different delivery rates.
Important notes and considerations for using the infusion pump with patients.
Visual representation of the device's internal components and their interconnections.
Troubleshooting specific to the device's software and error codes.
Detailed instructions for repairing the drive unit, subdomain B, including specific parts.
Procedure for performing periodic inspections and maintenance on the device.
Spare parts list for the analog circuit board, including connectors and switches.
Spare parts list for the control unit, specifically for models without Reed contacts.
Spare parts list for housing upper parts, categorized by keyboard language.
Spare parts list for the microprocessor circuit board and related components.
Circuit diagram for the analog circuit board, detailing component connections and signals.
Schematic diagram of the processor board, showing ICs, connections, and test points.
Circuit diagram for the rear panel circuit board, including connectors and wiring.
Wiring diagram for the power supply unit, showing voltage range configurations.
To Next Page