B-TEC Starter 01 - 8. Safety Inspection Checklist; Inspection Items and Results

Spray-gun cleaner Starter Page 18
equipment and facility engineering
8. Safety inspection checklist
Please make copies before filling out first time!
Safety inspections must be conducted at least once every year!
OK | Missing or faulty | Rechecked
1. Operating instructions
2. Model design label
3. Warnschilder
4. Condition of fluid hoses*
5. Condition of compressed air hoses*
6. Clean intake filters
7. Check washer cabinet for leaks
8. Functiontest of all control elements
9. Grounding of the gun cleaner
10. Check of the exhaust
* Check for brittleness etc.
Expert technician Date of the safety check
Result of the safety inspection
No faults, can be operated without restrictions.
Restricted operation, faults to be repaired by _______________.
Operation not allowed, Re-inspection necessary.
_______________________________ _________________________________
Signed by expert technician Signed by operator
After correction faults
_________________________________ _________________________________
Signed by expert technician Signed by operator
Name: __________________________________________
Address: __________________________________________
__________________________________________
_________________________
Item checked