Need help?Do you have a question about the B-TEC Starter 01 and is the answer not in the manual?
General| Brand | B-TEC |
|---|---|
| Model | Starter 01 |
| Category | Controller |
| Language | English |
Key safety warnings and recommendations for operation and inspection.
Details on the allowed applications and restrictions for B-TEC devices.
Explanation of warning symbols used in the manual.
Describes the features and operational differences between Starter 01 and 02 models.
Presents technical specifications like pressure, emissions, and container details.
Illustrates external dimensions and cleaning room specifications with diagrams.
Lists and identifies all parts with their corresponding ordering numbers.
Diagrams the pneumatic system and lists associated spare parts.
Details the approved and prohibited cleaning agents and their classifications.
Provides advice on solvent consumption reduction and safe agent handling.
Covers general safety principles, manufacturer liability, and reading the manual.
Lists relevant occupational safety regulations and information sources.
Details operational safety, prohibited persons, protective measures, and handling procedures.
Explains risk zoning, explosion protection, and safety requirements for installation areas.
Specifies conditions and requirements for the machine's installation location.
Details steps for wall mounting and assembling the drain hose.
Details for exhaust system routing and compressed air supply requirements.
Instructions for grounding the device and initial commissioning steps.
Steps for connecting hoses and preparing the machine for operation.
Describes how to operate the manual cleaning functions of the machine.
Instructions for operating the automatic spray gun cleaning cycle.
Explains how to adjust the valves for different cleaning functions.
Routine maintenance tasks for cleaning filters, interior, and drain pan.
Guidelines for proper disposal of the machine.
Checklist for annual safety inspections and recording results.
To Next Page