B2 Audio RAGE 1200.2 - Design Features

Design features
Circuit Configuration:
Frequency Response:
Signal to Noise Ratio: > 90 dB > 90 db
Input Sensitivity: 5 V ~ 0.2 V 5 V ~ 0.2 V
Crossover Circuit:
low pass crossover: 20 Hz ~ 1 KHz 20 Hz ~ 1 KHz
high pass crossover: 40 hz ~ 5 kHz 40 hz ~ 5 kHz
24 dB / Oct 24 dB / Oct
Damping Factor:
high level input:
power terminal gauge: 4 ga 4 ga
fuse rating: 100 a 100 a
>400 >400
Dimensions: 27 x 16.4 x 5.8 cm / 10.6 x 6.45 x 2.28” 27 x 16.4 x 5.8 cm / 10.6 x 6.45 x 2.28”
Continious output power (RMS)
rage 1200.2 13.8 v < 1% tHD 14.4 v < 1% THD
OUTPUT POWER @ 4 Ω: 2 x 350 W 2 x 400 W
OUTPUT POWER @ 2 Ω: 2 x 550 W 2 x 600 W
bridged power @ 4 Ω: 1 x 1100 W 1 x 1200 W
Description of specifications
* Speaker overload
* Short circuit
* Input Volt
age - RCA & Power Supply
3
rage 1200.4
Hi-ef class d fullrange
10 Hz ~ 25 KHz (+/- 2 db)
Operational voltage 9V ~17.5V.
Continious output power (RMS)
rage 1200.4 13.8 v < 1% tHD 14.4 v < 1% THD
OUTPUT POWER @ 4 Ω: 4 x 200 W 4 x 250 W
OUTPUT POWER @ 2 Ω: 4 x 275 W 4 x 300 W
bridged power @ 4 Ω: 2 x 550 W 2 x 600 W
rage 1200.2
Hi-ef class d fullrange
10 Hz ~ 25 KHz (+/- 2 db)