B2 Zero Series - Master; Daisy Chained Mode

8
daisy
master
daisy chain - master and daisy mode
In daisy chain mode, the master amplier's audio settings, such as gain, crossover, etc., are routed to the amplier
marked as daisy. From that daisy amplier, you can route the input signal from the master amplier to a second
daisy by using the output RCA on the rst daisy amplier. You can continue adding ampliers in a chain this way.
This feature is very useful when you run multiple subwoofers and have a hard time gain-matching them. If there is a
slight voltage discrepancy between the master and the daisy amplier, you can use the gain daisy to ne-tune the
signal by +/- 5%.