B2 Zero Series - Accu8 - the Accurate Crossover

9
accu8 crossover
CLick settings for LPF
LPF LPF LPF
1. 33 Hz 15. 61 Hz 29. 160 Hz
2. 34 Hz 16. 68 Hz 30. 170 Hz
3. 34 Hz 17. 76 Hz 31. 181 Hz
4. 35 Hz 18. 86 Hz 32. 185 Hz
5. 35 Hz 19. 100 Hz 33. 190 Hz
6. 36 Hz 20. 111 Hz 34. 195 Hz
7. 36 Hz 21. 116 Hz 35. 200 Hz
8. 39 Hz 22. 120 Hz 36. 203 Hz
9. 41 Hz 23. 125 Hz 37. 207 Hz
10. 43 Hz 24. 130 Hz 38. 210 Hz
11. 46 Hz 25. 135 Hz 39. 230 Hz
12. 50 Hz 26. 140 Hz 40. 240 Hz
13. 55 Hz 27. 144 Hz 41. 250 Hz
14. 57 Hz 28. 151 Hz
accu8
• The accurate crossover setting
Dealing with guesses and improper settings of your crossovers seems futile when you have invested both time and
money into your audio system. If you use a DSP, you can set the crossovers at any specied frequency you see t.
On the amplier's crossover setting, you would have to rely on costlier tools or guesses. The ACCU8 feature eliminates this
challenge. The potentiometers, except for the gain, have a 41-click ratio when turned. Each of these clicks corresponds to a
specic frequency or level increase in dB. The chart below indicates these settings.