EasyManua.ls Logo

Baby Lock Ellure PLUS BLR3 - Removing the Embroidery Unit

Baby Lock Ellure PLUS BLR3
200 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
146
EMBROIDERY 
Removing the embroidery unit
Make sure that the sewing machine is completely
stopped and follow the instructions below.
Remove the embroidery frame.
For details on removing the embroidery
frame, refer to “Removing the embroidery
frame” (page 152).
Press , and then press .
X The embroidery carriage moves into a
position where it can be stored.
Turn off the sewing machine.
CAUTION
Hold the release button on the bottom left of
the embroidery unit, and slowly pull the
embroidery unit to the left.
a Release button
X The embroidery unit separates from the
sewing machine.
CAUTION
Always turn off the sewing machine
before removing the embroidery unit.
It may cause malfunctions if removed
when the machine is turned on.
Do not carry the embroidery unit by
holding the release button compartment.
a

Table of Contents

Other manuals for Baby Lock Ellure PLUS BLR3

Related product manuals