170
EMBROIDERY
Stopping while embroidering
If the embroidery is stopped before it is complete,
check the current needle count before turning off the
sewing machine.
Memo
z When the sewing machine is turned off, the
embroidery size and layout return to the
original setting.
Press / (“Start/Stop” button) to stop
the sewing machine.
Check the current needle count on the screen
and make a note of it.
If the needle count is not displayed, press
/ (Settings key), and then use
to display the following screen.
Press (Back key) to return to the
embroidery screen.
Press / (Embroidery key).
X The confirmation message is displayed.
Press .
X The selected pattern is deleted, and the
screen for selecting the embroidery pattern
type is displayed.
Turn off the sewing machine.
• Always detach the embroidery unit when you
move the sewing machine.
Turn on the sewing machine and select the
pattern.
To Next Page
Loading...
