BabySense PC01-CR - Page 16

In order to switch back the device to the regular mode,
turn the device OFF and back ON.
NOTE: Aer turning sensive mode on, make
sure the green Movement Indicator Light is blinking.
Ticking mode
Re-pressing the power buon briefly while the device is
already ON, will add an audible TICK with every blink of
the green Movement Indicator Light. Another brief
press on the power buon, will stop the cking mode.
NOTE: Make sure not to make a long press on the
power buon, as this would switch the device off.
Switching off
To switch the monitor off, press and hold the ON / OFF
buon unl the switch-off sound is heard and the green
Led indicator light flashes once.
V.BS(PE)(UG)02.US.05.17
16
Troubleshoong Guide
Symptom Possible Cause Soluon
The alarm does
not sound
during the daily
Performance
Test
• Fold the diaper over on top
so it's really secure when
you clip the monitor on.
Folding down the top of the
diaper seems to reduce
significantly the risk of
false alarms.
• If your baby is rolling over
a lot, it is also possible to
put a onesie and a pair of
sweat pants on, and then
clip the monitor over the
elasc band of the pants
(it's thicker).
• Using a diaper cover, also
solves the alarm issues.
• Move the device to a
moonless locaon and
perform the daily
performance test as
specified in this user guide.
For all product-related quesons kindly contact your nearest distributor.
Visit www.babysensellc.com
• The device detects motion.