BabySense PC01-CR - Page 2

• Before installing and using Pete Clip, make sure you
read all the instrucons carefully.
• Keep these instrucons for future reference.
• Do not use improvised straps to hold the monitor as
they might create a restricon and choking hazards.
• Carry out the daily Performance Test for the Pete Clip,
as described in the secon “Daily Performance Test” below.
• Ensure that the device alarm can be heard by a caregiver
if baby is covered in clothing and/or blankets and in all
locaons throughout the place of care.
• Do not use if damaged, worn or funconing improperly.
• Do not use force to bend the clip and avoid applying
unnecessary pressure on the sensor pad (see Fig. H and
Fig. I on page 13).
• Be cauous while opening the device cover with the
opening tool supplied (as described in the secon
“Replacing the baery”).
IMPORTANT:
2