82 Instruction 3015-4148
WARRANTY and SERVICE
Warranty
Subject to the terms herein, Seller warrants the original equipment cataloged or manufactured by the Seller
and furnished hereunder is free from defects in material and workmanship, and will be of the kind and quality
designated or described on the quotation. The Seller will warrant the original equipment for 24 months from
the date of shipment from the manufacturing facility unless different or additional conditions are specified and
shall be binding through a written contract signed by an officer of the Seller.
Seller also warrants that certain consumable parts as hereunder identified, have a one (1) year warranty
period from the date of shipment and will be free from all defects in material during that period. Seller does
not warrant these parts however, beyond the initial installation due to variables associated with normal usage.
These certain consumable parts include, but are not limited to, the air flow filters.
If within 24 months of the date of shipment, the equipment does not met the warranties specified above, and
Purchaser notified Seller of this promptly, Seller shall there upon correct any such defects or any non-
conformance to the specifications within a reasonable time period. Material found to be defective shall be
returned to the seller freight prepaid. At the Seller’s option, the defective material shall be repaired or
replaced and returned to the purchaser via the lowest freight rate available. Any repairs or alternations
made by unauthorized personnel will automatically void warranty.
Labor cost for warranty service at the manufacturing facility is the Seller’s responsibility for a period of 90 days
following date of shipment. Beyond 90 days, Purchaser is responsible for all labor costs. Purchaser must
contact the Seller’s Service Department prior to shipment and obtain a Return Authorization (RA) number.
The package must be clearly marked with the assigned RA number. Purchaser may elect to have Seller’s
Service Department repair the equipment at Purchaser’s facility. Purchaser must contact Seller’s Service
Department in Newnan, Georgia to arrange for a Service call. Parts will be free under the above terms, but
there will be a charge for labor and travel expenses from Seller’s facility in New Kensington, PA.
The conditions of any tests or equipment hereunder alleged to be defective shall be mutually agreed upon
and Seller hall be notified of, and may be present or represented at all tests that may be made. Seller’s
liability to Purchaser or that of Seller’s Agent/Representative, arising out of the supplying of the equipment or
its use, whether based on warranty, contract, or negligence shall not in any case, exceed the cost of
correcting defects in the equipment as herein provided but shall, in all events, be limited to a maximum of the
purchase price. Upon the expiration of the applicable warranty period mentioned above, all such liability shall
terminate. The foregoing shall constitute Purchaser’s sole remedy and Seller’s sole liability. IN NO EVENT
SHALL SELLER BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Register Your Warranty by Visiting
www.bacharach-inc.com
Service
Pursuant to the stated warranty, Bacharach, Inc. warrants the products to be free of manufacturers defect for
two (2) years from the date of shipment or installation and will replace any part free of charge during that
period. Labor beyond ninety (90) days of shipment or installation is subject to charge. FAILURE TO
LOCATE THE AGM300 OR ADM800 IN A LOCATION COMPATIBLE WITH THE CRITERIA SET FORTH
IN THIS MANUAL CONSTITUTE ABUSE OF THE EQUIPMENT AND MAY VOID THE WARRANTY.
Shipments are tracked by the factory and the purchaser will be responsible for providing acceptable
documentation to prove the installation date. FAILURE TO NOTIFY THE FACTORY WITHIN TWO (2)
WEEKS OF INSTALLATION OF THE EQUIPMENT WILL VOID THE COVERAGE OF THE LABOR
SPECIFIED IN THE WARRANTY. Should any of the products covered (refer to following section - Products
Covered under Warranty and Service Policy) incur a failure or damage contact the factory service department
(724-334-5051) and request instructions.
To Next Page
Loading...
Need help?
General
