To Next PageTo Next Page
Need help?Do you have a question about the Backyard Discovery 6411 and is the answer not in the manual?
General| Product Name | Backyard Discovery 6411 |
|---|---|
| Category | Baby Swing |
| Maximum Weight Capacity | 50 lbs |
| Hanging Hardware Included | Yes |
| Assembly Required | Yes |
| Material | Plastic |
| Color | Yellow |
Instructions to read the entire booklet before starting the assembly process.
Information on warranty voiding for commercial use and retaining instructions.
Check and tighten nuts/bolts twice monthly; inspect coverings and edges.
Oil metallic parts monthly; inspect wood for splinters and apply sealant annually.
Information on Chinese Cedar, natural wood checks, and stain application.
Details on warranty, lumber dimensions, and best practices for starting assembly.
Guidelines for placing the pergola swing on level ground and clearance requirements.
Key considerations for assembly: leveling, sorting, and correct hardware usage.
Identification of initial wood components, including posts, beams, and ground boards.
Identification of additional wood components, including swing supports and floor boards.
Identification of further wood components, including inlet supports and floor boards.
Identification of bolts, nuts, washers, and screws for assembly.
Identification of additional hardware, including washers, screws, and quick links.
Identification of accessory items such as chain assemblies and ground stakes.
Attaching beam supports and ground boards to posts for the initial frame.
Instructions for attaching the second set of beam supports and ground boards.
Attaching pergola beams and rail supports to the frame structure.
Attaching the floor supports to the ground boards.
Installing all floor boards onto the frame and supports.
Securing corner supports to pergola beams and posts for structural integrity.
Attaching inlet supports to the main posts of the structure.
