Bad Boy 1022H Operator's Manual

6
-
13
MAINTENANCE
6
Use only low sulfur or ultra low sulfur
diesel fuel.
▶
How to bleed fuel system
It is necessary to bleed the system un-
der the following conditions.
- The engine is stopped due to the
empty fuel tank.
- The lter or pipe is removed.
①
Unscrew the bleeding screw.
②
Start the engine.
③
When clean fuel flows out of the
bleeding screw, tighten the screw.
④
Repeat the procedure if the system
is not bled completely.
③
Add engine oil to the specied level.
④
Run the engine for approx. 5 min-
utes and check for proper operation
through the engine oil warning lamp.
Then, stop the engine.
(This warning lamp should be turned
o󰀨 while the engine is running.)
⑤
Check the oil level with the dipstick
again. If still insu󰀩cient, add more.
FUEL SYSTEM
(1) Fuel Tank Cap (1) Bleeding Screw
1
1

If foreign materials, such as dust
and sand, or water are mixed in
fuel, it can deteriorate the per-
formance of the fuel injection
pump. Make sure to add quality
fuel through the strainer.
NOTE
1
1
BB1022H.indb 13BB1022H.indb 13 2021-06-28 오후 5:53:282021-06-28 오후 5:53:28

Bad Boy 1022H Specifications

General

Brand	Bad Boy
Model	1022H
Category	Tractor
Language	English