Bad Boy 1022H Operator's Manual

6
-
15
MAINTENANCE
6
▶
GREASING POINTS
For general greasing points, refer to the
fuel, oil and uid specication chart.
However, add grease before work if the
tractor is to be used in a wet eld.
▶
GREASING BRAKE ARM
Remove the rubber caps on the floor
and dash panel to access to the grease
nipple.
Add grease with the supplied grease
gun.
Rubber parts, such as the fuel hose
and radiator hose, are aged by time
even when the tractor is not in use.
Therefore, such parts should be re-
placed with their tightening bands every
2 years or when they are damaged.
▶
AIR CLEANER CLEANING
Blow compressed air from the inside
toward the outside of the element.
Keep proper distance between the
air nozzle and element.
▶
AIR CLEANER REPLACING
After cleaning the element 5 times or
if it is damaged, replace it with a new
one.
GREASING
CHECKING HOSES

Do not hit the element with
a rock or concrete during its
cleaning.

Make sure to install the element
rmly.

Tighten each part of the air
cleaner securely to block dust
completely.
NOTE
WARNING

If any fuel hose is damaged, fuel
leaks and it can catch fire. Make
sure to check the fuel hose and
take a necessary action.
BB1022H.indb 15BB1022H.indb 15 2021-06-28 오후 5:53:282021-06-28 오후 5:53:28

Bad Boy 1022H Specifications

General

Brand	Bad Boy
Model	1022H
Category	Tractor
Language	English