5
-
12
STARTING OFF, SHIFTING AND DRIVING
STOPPING AND PARKING
▶
STARTING OFF
1. Lift an implement.
2. Place the main shift lever, range shift
lever and shuttle shift lever into the
desired positions.
3. Depress the brake pedal to release
the parking brake.
•
The driving speed in the reverse
direction is almost the same to
the speed in the forward direc-
tion. Make sure to check the sur-
roundings carefully when driv-
ing backward.
•
Especially, never drive back-
wards with the range shift le-
ver in the position H. The driving
speed becomes faster and it can
cause an accident.
WARNING
•
After parking, make sure to ap-
ply the parking brake.
•
Avoid parking on a slope if pos-
sible. If it is absolutely neces-
sary to park on a slope, chock
the rear wheels.
WARNING
1. Operate the throttle lever to set the
engine at a low speed.
2. Release the forward driving (HST
type) and accelerator (mechanical)
pedals slowly. Depress the brake
pedals for abrupt braking.
3. When the vehicle is completely
stopped, set the shift lever in the neu-
tral position.
4. Apply the parking brake.
5. If an implement is attached to the ve-
hicle, lower it.
6. Remove the key from the switch af-
ter parking vehicle.
BB1022H.indb 12BB1022H.indb 12 2021-06-28 오후 5:53:252021-06-28 오후 5:53:25