Bad Boy 1022H Operator's Manual

8
-
4
BRANSON TRACTOR
drops that will produce condensa-
tion that will be the cause of rust
formation. And lock the fuel cock
to “C”. (Closed)
4. Disconnect the battery completely
and store it away from the tractor
in a well-ventilated, dry, dark place
if possible. When the battery is at-
tached to the tractor, make sure to
connect the (+) terminal rst.
5. Change the engine oil and run the en-
gine to circulate oil throughout all the
engine parts for about 5 minutes.
6. Drain the coolant from the radiator.
After draining the coolant, attach a
tag of "No coolant, do not start" to
the steering wheel. If there is an-
ti-freeze in the cooling system, it is
not necessary to drain it.
7. Check the bolts and nuts for loose-
ness, and tighten if necessary.
8. Add oil, uid and fuel to each part
according to the maintenance
chart.
9. Apply a slight coat of grease or
oil onto the tractor parts where is
easy to be rust such as bare metal
surface.
10. Inate the tires to a pressure a
little higher than usual.
11. Place chocks behind and in front
of the rear wheels.
12. Store it in a dry indoor place to
avoid rain or snow and cover the
body.
13. Keep the clutch pedal in a de-
pressed position to avoid rust on
the clutch.
14. Put all controls into the neutral
position.
BB1022H.indb 4BB1022H.indb 4 2021-06-28 오후 5:53:302021-06-28 오후 5:53:30

Bad Boy 1022H Specifications

General

Brand	Bad Boy
Model	1022H
Category	Tractor
Language	English