EasyManua.ls Logo

Bad Boy 3026H 2021 - Filters; Coolant Replacement; Engine Oil Filter

Bad Boy 3026H 2021
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
-
9
MAINTENANCE
6
FILTERS / COOLANT REPLACEMENT
ENGINE OIL FILTER
FRONT AXLE FLIUD
(1) Engine Oil Filter
Replace it every 300 hours or when
engine oil is changed.
First 50 hours, lter has to be
changed.
NOTE
REPLACEMENT
1. After draining the engine oil, turn
the cartridge to the left with the l-
ter wrench.
2. Apply a thin lm of oil over the rub-
ber ring on the bottom of the new
cartridge and attach the new lter
securely.
3. After changing the engine oil, start
the engine and run it until the en-
gine oil pressure warning lamp is
turned o󰀨 .
4. After the oil pressure warning
lamp is turned off, check the oil
level again. Add oil as necessary.
►CHANGING OIL
Drain the fluid through three drain
holes under the front axle.
Refill the fluid from the upper right
side of the front axle
(1) Drain Plug
2024h_3026h.indb 92024h_3026h.indb 9 2020-09-18 오후 6:17:302020-09-18 오후 6:17:30

Table of Contents

Related product manuals