5
-
7
OPERATION
5
• Damage to the coating of the ca-
bles, or loosening of the contacts.
4. Check around the implement.
• Condition of the locking pin of
the universal joint inserted in the
PTO shaft.
• Condition of pins in each part.
• Loosening of the bolts holding
the blade.
• Quantity of oil in each part. For
more details, please refer to the
implement manufacturer’s in-
structions.
5. Check on the driver seat.
• Operational condition and free
play of the brake. (0.2~0.4 in)
A
(A) Free play 0.2 ~ 0.4 in
2024h_3026h.indb 72024h_3026h.indb 7 2020-09-18 오후 6:17:242020-09-18 오후 6:17:24
To Next Page
Loading...
