Maintenance and Adjustment
9-2
CAUTION:
To avoid personal injury and vehicle damage:
Be sure you have sufficient knowledge, experience, the proper replacement part
s and
t
ools before you attempt any vehicle maintenance task.
If you don’t have the knowledge and equipment which are necessary to pe
rform the
maint
enance task, consult your local dealer
.
SER
VICE INTERVALS
ITEM
MAINTENANCE INTERVAL (WHICHEVER
COMES FIRST)
REMARKS
Hours Frequency Miles (KM)
Pre-Ride Inspection Check
Steering - Pre-Ride - Inspect for loose hardware or abnormal wear
Front-suspension - Pre-Ride - Inspect for loose hardware or abnormal wear
Rear-suspension - Pre-Ride - Inspect for loose hardware or abnormal wear
Tires - Pre-Ride - Proper tire pressure
Brake fluid level - Pre-Ride - Inspect and add if needed
Brake pedal travel - Pre-Ride - See Owner's Manual
Brake systems - Pre-Ride - Make adjustments as needed.
Lug Nuts - Pre-Ride -
Ensure lug nuts are torqued to spec
Frame fasteners - Pre-Ride - All fasteners are secured
Engine Oil Level - Pre-Ride - Inspect and add if needed
Coolant - Pre-Ride - Inspect and add if needed
Head / Tail / Brake Lights - Pre-Ride - Check operation
ITEM
MAINTENANCE INTERVAL (WHICHEVER
COMES FIRST)
REMARKS
Hours Frequency Miles (KM)
Break-In Maintenance Check
Engine Oil/Filter change 10 - First 50 (75)
Replace break-in oil & filter with proper oil
type
Transmission 20 - First 100 (150)
Initial fluid level inspection; add lubricant if
needed
Toe adjustment 20 - First 100 (150)
Inspect periodically; adjust when parts are
replaced
Clutches (Drive and
Driven)
20 - First 100 (150) Inspect; clean; replace worn parts
To Next Page
Loading...
