Trimble® and ME
Page 10 January 2018
Meter Indoor Installation
The endpoint should be mounted outside the building or in the floor joist near an outside
wall, and away from large metal objects for maximum propagation of the radio signal. The
remote installation bracket helps for indoor installations such as a floor joist.
If the meter is installed indoors, a radio endpoint could be mounted outdoors on the outside
of the building.
The ORION Remote Wall Mount Enclosure is designed for mounting ORION endpoints in
indoor or outdoor environments and also provides an environmentally protected area for gel
splicing connections (if needed) to be maintained inside the enclosure.
Remote Wall Mount Box Enclosure
Kit (66009-004).
To Next Page
Loading...
Need help?
General