Badger Meter Trimble Ranger 3 User Manual

Trimble® and ME
Page 35 January 2018
• Quick Keys – Allows the user to change Quick Key preferences from Double Tap to
Single Tap.
• Reading Entry Direction – Allows the user to change the default Left to Right read
direction on select services. This is helpful when manual reads are entered.
• Serv1 Left to Right
• Serv2 Left to Right
• Serv3 Left to Right
Show Route Complete Messages – Allows the user the option to display a popup when
each route is complete.
Route Processing Options –
• High/Low options – (password protected) Allows changes to the requirements
needed when a manual reading is entered outside of the expected high/low range.
• Advance on High/Low (RF only)
• Beep on High/Low (RF only)
• Show High/Low Values
• High/Low Inclusive – signals alert
when the reading equals the high or
low value
• Manual Entry Exception
Processing – Configured to accept the
reading, acknowledge the reading, or
reenter the reading
• Show Previous Read
• Route Boundary Alerts – Allows the
user the ability to display a popup
when they are crossing over to another route.
• Allow Manual Route Complete – Allows the user to manually flag a route as
complete
• Skipped Options – Allows the user the ability to identify why a meter is unread.
• Disabled (not used)
• Requires No Code – An unread meter, flagged as skipped and no explanation is
required.
• Requires Trouble Code – An unread meter, flagged as skipped and using a
predefined Trouble Code.
• Requires Reader Code - An unread meter, flagged as skipped and using a
predefined Reader Code.
• Route Start Option – Allows the user to define the route start quick key option.
• Start of Route
• Start of File
Data Transfer Options – Defines how the data is transferred to and from the handheld.
These settings are password protected.

Badger Meter Trimble Ranger 3 Specifications

General

Brand	Badger Meter
Model	Trimble Ranger 3
Category	Handhelds
Language	English