USER MANUAL – BBS SERIES DRIVE SYSTEM
1 GUIDE
1.1 Quick Start
This section provides important information and
instructions that will allow you to use your
pedelec in a safe manner. First, please read the
safety instructions to find out about the legal
regulations that apply to you.
• Please make sure your pedelec is adapted to
• Ensure that the battery is in place and
properly connected
your needs.
• To start the system, normally prsess and
hold the “ “ button on the control panel for
3 seconds.(Depending on the description of
the display you have)
• Select the support level.
The pedelec is now ready for operation.
Always press the brakes of your pedelec
before placing your foot on the pedal! The
motor starts assisting as soon as you start
pedaling. Without the correct procedure, the
pedelec can suddenly start, which can lead to
injuries.
1
2
Practice using the pedelec in a quiet and safe
environment. It is important to learn the
characteristics of the pedelec before you drive
on public roads.
1.2
Please also take note of additional user manuals
that you received.
Before Each Ride
Do not try to ride the bike if you think that your
pedelec might be defected. Before the first ride,
please make sure that the retailer has checked
the complete bike before handing it over to you.
It is also recommended to have all components
of the bike checked regularly, especially if you
ride on a regular basis. If you mistreat the
pedelec, it can lead to accidents and injuries.
Please check the pedelec after an accident or if
your pedelec has fallen over.
• Please buy battery from reliable supplier
To Next Page
Loading...
