Need help?Do you have a question about the BAFANG DP C10.UART and is the answer not in the manual?
General| Connection | UART |
|---|---|
| Backlight | Yes |
| Nominal Voltage | 36V/48V |
| Communication Interface | UART |
| Waterproof Rating | IP65 |
| Compatibility | Bafang motors |
| Display Type | LCD |
| Motor Type | Mid-drive |
| Rated Power | 250W to 750W (depending on the motor) |
| Max Torque | 80 N.m |
| Max Speed | 25 km/h |
Details electrical specs like voltage, current, temperature, and waterproof grade.
Describes materials and provides physical dimensions of the display and controller.
Explains product functions, communication, speed display, battery level, and key definitions.
Instructions for turning the display on and off, and automatic shut-off.
How to select the motor support level using the keypad.
Explains how to cycle through different display modes like TRIP, TOTAL, MAXS, AVG.
How to control the display backlight, headlight, and taillight.
How to activate and deactivate the walk assistance mode.
Explains battery level display, status indication, and USB charging.
How to enter the menu and navigate through settings and submenus.
Settings for units, display brightness, auto-off time, warnings, and speed limits.
Information on battery menu details and error code records.
Details the warranty duration for different components and covered faults.
Lists specific types of damage or failures that are excluded from warranty coverage.
To Next Page
