Need help?Do you have a question about the BAFANG DP C10.CAN and is the answer not in the manual?
General| Type | Display |
|---|---|
| Display Type | LCD |
| Backlight | Yes |
| Water Resistance | IP65 |
| Communication Protocol | CAN bus |
| Gear Sensor Support | Yes |
| Compatibility | BAFANG CAN protocol e-bike systems |
| Nominal Voltage | 36V/48V |
| Rated Power | 250W |
| Display Compatibility | BAFANG CAN protocol e-bike systems |
| Motor Type | Brushless Geared Motor |
Instructions for powering the display system on and off.
How to choose and adjust the motor's assistance level.
Navigating through different display modes and trip data.
Controls for activating and adjusting the display's lighting.
How to activate and use the walk assistance feature.
Explanation of how battery status is shown on the display.
Information about using the display's USB charging capability.
Accessing and navigating the main settings menu.
How to reset trip data, maximum speed, and average speed.
Changing display units between kilometers and miles.
Adjusting the display's automatic brightness based on ambient light.
Manually adjusting the display's backlight brightness.
Instructions for powering the display system on and off.
How to choose and adjust the motor's assistance level.
Accessing and navigating the display settings menu.
Instructions for powering the display system on and off.
How to choose and adjust the motor's assistance level.
To Next Page
