To Next PageTo Next Page
Need help?Do you have a question about the BAFANG DP C171.UART and is the answer not in the manual?
General| Brand | BAFANG |
|---|---|
| Model | DP C171.UART |
| Category | Bicycle Accessories |
| Language | English |
Details numbering on the back of the HMI unit, divided into up and down rows.
Explains the numbering on the P-type wire label, including the QR code.
Describes how to turn the display on and off, and automatic shut-down.
Explains how to select the desired level of motor support from Level 1 to 5.
Details how to switch between different display modes for speed and distance data.
Explains how to control the display and headlight backlight brightness.
Describes how to activate and use the walk assistance mode.
Explains the battery level display and charging status.
Lists the configurable parameters for the display unit.
Details how to enter the parameter setting state.
Explains how to reset temporary data on the display.
Describes how to switch between kilometers and miles for speed display.
Explains how to adjust the display's light sensitivity.
Details how to adjust the brightness level of the display backlight.
Explains how to set the automatic display shutdown time.
Describes the maintenance alert function and how to enable/disable it.
Explains how to check and set the wheel diameter for accurate speed readings.
Describes how to set the speed limit for the e-bike.
Details how the display communicates battery information.
Information on using the Bafang GO APP and SDK for display connectivity.
Lists the types of data that can be displayed on the Bafang GO APP.
