To Next PageTo Next Page
Need help?Do you have a question about the BAFANG DP C13.CAN and is the answer not in the manual?
General| Backlight | Yes |
|---|---|
| Water Resistance | IP65 |
| Interface | CAN |
| Motor Type | Mid-drive |
| Nominal Voltage | 36V/48V |
| Rated Power | 250W/350W |
| Maximum Torque | 80 N.m |
Crucial warnings and care instructions for the display, including cleaning and avoiding water submersion.
Identifies the display model and provides information about its label marking and QR code.
Key technical specifications including operating temperature, storage, and waterproofing.
Overview of the display's core functionalities such as speed, battery, and error indications.
Detailed explanation of each numbered indicator and segment on the display screen.
Mapping of the physical buttons (Up, Mode/System On/Off, Down) to their respective functions.
Instructions for switching the system ON/OFF and managing automatic shutdown.
How to select and adjust the motor assist support levels.
Procedure for activating and deactivating headlights and taillights.
Steps to activate the walk assist feature for pushing the bike.
How to navigate through different data displays like ODO, TRIP, and TIME.
Explanation of the 'Service Tip' indicator that appears after specific mileage.
Guidance on interpreting error codes shown on the display and initial troubleshooting.
Visual representation of the battery's remaining charge level.
Procedure for entering the display's settings menu using button combinations.
How to reset trip data, maximum speed, average speed, and time.
Switching between metric (km/h) and imperial (mph) units for speed and distance.
Adjusting the screen brightness level for optimal visibility.
Configuring the time delay before the display automatically shuts down.
Setting the number of available motor assist levels (e.g., 3, 5, or 9).
Accessing and viewing various data points and system information.
Setting the wheel circumference for accurate speed and distance calculations.
Setting a maximum speed limit for the e-bike's motor assist.
Viewing software and hardware versions for the motor controller.
Viewing software and hardware versions for the display unit itself.
Viewing software and hardware versions for the connected sensors.
Enabling or disabling the notification for service intervals.
Configuring which specific error codes trigger a notification.
Accessing comprehensive battery status, including temperature, voltage, and capacity.
List of error codes, their meanings, and recommended troubleshooting steps.
