BAFANG DP C15.CAN User Manual

C10.CAN
C15
.CAN E10.CAN
LOVE AT FIRST RIDE
DISPLAY MANUALS
BIM A S BIKES

BAFANG DP C15.CAN Specifications

General

Brand	BAFANG
Model	DP C15.CAN
Category	Bicycle Accessories
Language	English

Summary

7.1 IMPORTANT NOTICE

7.3 PRODUCT DESCRIPTION

7.3.1 Specifications

Details operating temperature, storage, waterproof rating, and humidity.

7.3.2 Functional Overview

Lists all functions including speed display, battery indicator, walk assistance.

7.4 DISPLAY INSTALLATION

7.5 DISPLAY

7.6 KEY DEFINITION

7.7 NORMAL OPERATION

7.7.1 Switching the System ON/OFF

Instructions for powering the display unit on and off.

7.7.2 Selection of Support Levels

How to adjust the assistance level of the e-bike system.

7.7.3 Selection mode

How to cycle through different display modes (TRIP, TOTAL, MAXS, AVG, etc.).

7.7.4 Headlights / backlighting

Instructions for controlling the display's backlight and headlights.

7.7.5 Walk Assistance

How to activate and use the e-bike's walk assistance feature.

7.7.6 Battery capacity indication

Explanation of how battery level is displayed using bars.

7.7.7 USB charge function

Details on using the display's USB charging capability.

7.8 SETTINGS

7.8.1.1 Reset mileage

How to reset trip data, maximum, and average speed.

7.8.1.2 Selection of unit in km/Miles

How to change the unit display between kilometers and miles.

7.8.1.3 Set light sensitivity

How to adjust the automatic light sensitivity of the display.

7.8.2.1 Wheel Size

View the configured wheel size for accurate speed readings.

7.8.2.2 Speed Limit

View the current speed limit setting.

7.8.2.3 Controller hardware info

View hardware version information of the controller.

7.8.2.4 Controller software info

View software version information of the controller.

7.8.2.5 Display hardware info

View hardware version information of the display unit.

7.8.2.6 Display software info

View software version information of the display unit.

7.8.2.7 BMS hardware info

View hardware version information of the Battery Management System.

7.8.2.8 BMS software info

View software version information of the Battery Management System.

7.8.2.9 Sensor hardware info

View hardware version information of the sensors.

7.8.2.10 Sensor software info

View software version information of the sensors.

7.8.2.11 Battery Information

View detailed battery status like temperature, voltage, capacity, SOC.

7.8.2.12 Message of Error Code

View the history of the last ten error codes displayed.

7.9 ERROR CODE DEFINITION

The throttle is not back in its correct position.

Troubleshooting for throttle not returning to its correct position.

The throttle has fault.

Troubleshooting steps for a faulty throttle.

Overvoltage protection

Troubleshooting for overvoltage protection errors.

Error with the hall sensor signal inside the motor

Troubleshooting for hall sensor signal errors within the motor.

Error with the Engine phase's

Troubleshooting for engine phase errors.

The temperature inside the engine has reached its maximum protection value

Troubleshooting for engine overheating protection.

The temperature sensor inside the motor has an error

Troubleshooting for errors with the motor temperature sensor.

Error with the current sensor in the controller

Troubleshooting for current sensor errors in the controller.

Error with the temperature sensor inside of the battery

Troubleshooting for temperature sensor errors in the battery.

The protection temperature inside the controller has reached its maximum protection value

Troubleshooting for controller overheating protection.

Error with the temperature sensor inside the controller

Troubleshooting for temperature sensor errors within the controller.

Speed sensor Error

Troubleshooting steps for speed sensor errors.

Torque signal Error

Troubleshooting for errors related to the torque signal.

Speed signal of the torque sensor has an error

Troubleshooting for speed signal errors from the torque sensor.

Overcurrent from controller

Troubleshooting for overcurrent issues originating from the controller.

Communication problem

Troubleshooting steps for communication failures between components.

Brake signal has an error (if brake sensors are fitted)

Troubleshooting for errors with brake sensor signals.

Detection circuit for 15V has an error

Troubleshooting for errors in the 15V detection circuit.

Detection circuit on the keypad has an error

Troubleshooting for errors in the keypad detection circuit.

WDT circuit is faulty

Troubleshooting for a faulty Watchdog Timer (WDT) circuit.

Total voltage from the battery is too high

Troubleshooting for excessively high battery voltage.

Total voltage from the battery is too low

Troubleshooting for excessively low battery voltage.

Total power from the battery cells is too high

Troubleshooting for excessive total power from battery cells.

Voltage of the single cell is too high

Troubleshooting for excessively high voltage in a single battery cell.

Temperature from the battery is too high

Troubleshooting for the battery overheating.

The temperature of the battery is too low

Troubleshooting for the battery being too cold.

SOC of the battery is too high

Troubleshooting for excessively high State Of Charge (SOC) in the battery.

SOC of the battery is too low

Troubleshooting for excessively low State Of Charge (SOC) in the battery.

Switching detection defect

Troubleshooting for defects in gear shifter detection.

Electronic derailleur cannot release.

Troubleshooting for issues with the electronic derailleur release.

Electronic lock is jammed

Troubleshooting for a jammed electronic lock.

Bluetooth module has an error

Troubleshooting for errors with the Bluetooth module.

7.6 NORMAL OPERATION

7.6.1 Switching the System ON/OFF

Instructions for powering the display unit on and off.

7.6.2 Selection of Support Levels

How to adjust the assistance level of the e-bike system.

7.6.3 Headlights / backlighting

Instructions for controlling the display's backlight and headlights.

7.6.4 Walk Assistance

How to activate and use the e-bike's walk assistance feature.

7.6.5 Selection Mode

How to cycle through different display modes (TRIP, TOTAL, MAXS, AVG, etc.).

7.6.6 SERVICE

Explanation of the service reminder function and its settings.

7.7 SETTINGS

7.7.1.1 "TRIP Reset" Reset mileage

How to reset trip data, maximum, and average speed.

7.7.1.2 "Unit" Selections in km/Miles

How to change the unit display between kilometers and miles.

7.7.1.3 "Brightness" Display brightness

How to adjust the brightness level of the display backlight.

7.7.1.4 "Auto Off" Set Automatic system switch off time

How to configure the automatic shutdown time for the display.

7.7.1.5 "Service" Switching the notification on and off

How to enable or disable the service reminder notification.

7.7.2.1 Wheel Size

View the configured wheel size for accurate speed readings.

7.7.2.2 Speed Limit

View the current speed limit setting.

7.7.2.3 Battery Information

View detailed battery status like temperature, voltage, capacity, SOC.

7.7.2.4 Controller Information

View hardware and software version of the controller.

7.7.2.5 Display Information

View hardware and software version of the display.

7.7.2.6 Torque Information

View hardware and software version of the torque sensor.

7.7.2.7 Error Code

View the history of the last ten error codes displayed.

7.2 INTRODUCTION OF DISPLAY