BAFANG DPC-10 Biktrix User Manual

Bafang DPC-10 Manual
Biktrix Version
CONTENORMAL INDICATION AREA
1 Battery level
2 Maintenance warning
3 Headlight indicator
4 Distance mode
5 Walk Assistance
6 Malfunction indication
7 Menu
8 Speed display
9 Speed model
10 Distance indication
11 Level indication
● Battery level: 10-segment battery
level indicator.
● Maintenance Warning: When there is
a need for maintenance the symbol
will be displayed (riding
distance or the number of battery
charge cycles exceed the set value,
function can be deactivated).
● Headlight indicator: only shows
when headlight or backlight are on.
● Distance mode: display of maximum
speed MAXS, average speed AVG, the
single-trip distance TRIP, the total
distance TOTAL, remaining distance
TO GO, power W, energy consumption
C.
● Level indication: The chosen level 1–5
will be displayed; if there is no numeric
display, it means that there is no
assistance (by the motor). If the rider is
walking and pushing the e-bike,
will be displayed.
● Error display: When a fault is detected
the symbol will be displayed.
● Speed display: display of the speed,
km/h or mph.
● Speed mode: average speed (AVG
km/h), maximum speed (MAXS
km/h).
● Distance indication: display of the
distance depending on the setting.

BAFANG DPC-10 Biktrix Specifications

General

Brand	BAFANG
Model	DPC-10 Biktrix
Category	Bicycle Accessories
Language	English

Summary

Normal Indication Area

Battery Level

10-segment indicator showing battery charge.

Maintenance Warning

SERVICE symbol alerts need for maintenance.

Headlight Indicator

Indicates when headlight or backlight is active.

Distance Mode

Displays various speed and distance metrics like MAXS, AVG, TRIP.

Level Indication

Shows motor assist level (1-5) or WALK mode.

Error Display

Fault symbol appears when an error is detected.

Speed Display

Shows current speed in km/h or mph.

Speed Mode

Displays average (AVG) or maximum (MAXS) speed.

Distance Indication

Shows distance based on the current setting.

Button Definition

Button Functions

Overview of Up, Down, Headlight, Switch, and Mode buttons.

Normal Operation

ON/OFF Switch

How to turn the display on, off, and automatic turn-off.

Assist Mode Selection

How to choose motor assist levels 1-5.

Switch between Distance and Speed Mode

Use the 'i' button to cycle through distance and speed readings.

Headlight/ Display Backlight Operation

Control display backlight and headlight/tail-light using the button.

Walk Assistance

Activate walk assistance mode by holding the button.

Battery Status Indication

Battery Status Key

Key correlating battery segments to percentage range.

USB Charging

How to charge the display using a USB cable.

Parameter Setting

Setting Preparation

How to enter the parameter setting menu and navigate.

Data Reset

How to reset temporary data like TRIP, MAXS, AVG.

Km/mile Setting

Switch between km/h and mph units.

Light Sensitivity

Adjust display light sensitivity from 0 to 5.

Display Backlight Brightness

Adjust backlight brightness from 1 to 5.

Automatic Off Time

Set automatic display shutdown time from 1 to 9 minutes.

Maintenance Warning

Enable or disable the maintenance warning feature.

Display Password

Password required to access further settings.

Wheel Diameter Check

Check wheel diameter setting to prevent speed abnormalities.

Speed Limit Setting

Set minimum and maximum speed limits.

Battery Communication

View battery communication status and error codes.

Error Code Definition