BUTTON DEFINITION
Up button
Headlight button
Switch button
Down button
Mode button
NORMAL OPERATION
● ON/OFF Switch ● Assist Mode Selection
Turn on the display, press and hold .
Press and hold again to power off
the display, If the bike is not used for 5
minutes (this time can be set) the
display will automatically turn off.
Press or choose the desired level of
assistance from the motor. The lowest
level is Level 1, the highest Level 5. When
the display is powered on, the default
mode is Level 1. When there is no number
displayed, there is no power assistance.
(power assistance level selection
interface as image below)
To Next Page
Loading...
