1
CUSTOMER MANUAL FRONT HUB MOTOR SYSTEM
CONTENT
1 Important Notice 2
2 Introduction 3
2.1 Overview 3
3 Safety Instructions 4
3.1 General information 4
3.2 For your safety 4
3.3 Installation and Maintenance 5
3.4 Safety Precautions 5
3.5 Quick Start 6
3.6 Before the first ride 6
3.7 Before each ride 6
3.8 Legal Regulations 7
4 Electronic Components 8
4.1 Important Instructions 8
4.2 Display – HMI DP E06.UART 8
4.2.1 Functional Overview 8
4.3 Batteries 9
4.3.1 User Instructions 9
4.3.2 Notification 10
4.3.3 Caution 11
4.3.4 Specifications 12
4.4 Charger 12
4.5 Hub motor 13
5 Operation 14
5.1 Installing the battery 14
5.2 Removing the battery 14
5.3 LED capacity and state of charge indication 14
5.4 Charging the battery 15
5.5 Switching the electrical system on and off 17
6 Displays and settings 18
6.1 Normal indication area 18
6.2 Button definition 19
6.3 Normal operation 19
6.3.1 Power ON / OFF 19
6.3.2 PAS level selection 19
6.3.3 Lamp/LED display luminance 19
6.3.4 Push-assistance selection 19
6.4 Error code definition 20
6.5 Range of your Pedelec 21
7 Maintenance and repairs 22
7.2 Storing the battery 22
7.3 Battery wear 22
8 Customer service 23
9 Transporting the Pedelec 24
9.1 By car 24
9.2 By public transport 24
9.3 By airplane 24
10 Disposal considerations 25
11 Specifications 26
12 After-Sales and Warranty Policy 28
Imprint 29
CONTENT
To Next Page
