EasyManua.ls Logo

BainUltra LIBRA 6632 - Page 18

BainUltra LIBRA 6632
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
1 800 463.2187 Monday to Thursday from 8 a.m. to 6 p.m. (EST)
.
Friday from 8 a.m. to 5 p.m. (EST)
Printed in Canada. Copyright © June 2023 Bains Ultra Inc. All rights reserved. 45200682
LIBRA COLLECTION | INSTALLATION INSTRUCTIONS
WARNING
Choose a location for the turbine with the shortest possible distance from the Thermomasseur
®
bath, no more
than 15 ft. (4,6m), and a maximum of six elbow directional changes to ensure system performance. It can be under
the oor, in a closet or any other place that can hide the turbine and if needed optional modules. Easy access must
remain possible at all time and sucient air ventilation is necessary for turbine.
A service access is necessary. Minimum dimensions are 22 in. x 18 in. (55 cm x 46 cm) to properly reach all electrical
components of the system.
An air vent is necessary. Minimum dimensions are: 2 in. x 4 in. (5 cm x 10 cm) to ensure proper functioning of the turbine.
• Geysair
®
cannot be remotely installed.
2
REMOTE MOUNTING OF TURBINE
1”
Bottom of door
When located in an enclosed
location.
Floor
REMOTE MOUNTING OF TURBINE