17
INSPECTION BEFORE RIDING
WARNING
Failing to inspect the ATV before operating could be hazardous. Failing to
perform proper maintenance could also be hazardous.
Failing to inspect and maintain your ATV could increase the chances of an
accident or equipment damage
Always inspect your ATV each time before riding, and make sure it is in a safe operating
condition. Refer to the INSPECTION AND MAINTENANCE section in this manual.
ITEM TO CHECK CONTENT
Steering Smoothness; No restriction of movement; No
play or looseness
Brakes Proper brake lever free play; enough brake
force; Parking brake effectiveness
Tires Proper air pressure; Enough tread depth; No
cracks, rips, or other damages
Fuel Enough fuel for the intended trip; Fuel hose
connected securely; No damage to fuel tank or
cap; Fuel tank cap closed securely
Engine stop switch Proper operation
Engine oil Proper level – Check oil by inspecting Engine
Oil Dip Stick. The engine oil should be
between the Minimum and Maximum lines.
Throttle Proper free play of throttle lever; Smooth
response; Quick return to idle position
Drive chain Proper tension; adequate lubrication; No excessive
wear or damage
General condition Bolts and nuts are tight; No rattle from any
parts of the engine when running; No visible
evidence of Damage
RIDING YOUR ATV
To Next Page
Loading...