EasyManua.ls Logo

Baja BA 250 - Starting the ATV Safely; Preventing Unexpected Movement; Indoor Operation Hazard; Step-by-Step Starting Procedure

Default Icon
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
WARNING
Running your ATV indoors where there is little or no ventilation could be
hazardous.
Breathing in exhaust gases from the ATV could cause severe injury.
Always run your ATV outdoors where there is fresh air.
WARNING
The ATV could start moving as soon as you start the engine.
Unexpected movement could cause you to lose control of the ATV.
Be sure to set the parking brake before you start the engine.
RIDING YOUR ATV
STARTING THE ENGINE
Before attempting to start the engine, make sure
to follow these steps.
1. Turn the fuel valve to “ON” position
2. Place choke lever to “ON” Position
3. Turn key switch to “ON” position.
4. Set the engine stop switch to the “ON“ position.
5. Apply brake lever and/or foot lever making sure that the wheels are in
locking condition.
6. Pull in clutch lever and press the starter button “START” to start the
engine.
7. Once engine has warmed up, place choke lever in “OFF” position.
Choke lever
ON
OFF
RUN OFF

Table of Contents

Related product manuals