Need help?Do you have a question about the Baldor VS1GV21-1B and is the answer not in the manual?
Essential safety warnings and precautions for installation and operation.
Step-by-step guide for initial system setup and basic operation.
Essential steps for properly grounding the drive for safety and performance.
Overview of terminal connections for the control board's I/O.
Description of the keypad layout, buttons, and display elements.
Guidance on tailoring drive parameters for specific applications.
Accessing and interpreting the drive's event log for fault analysis.
Viewing system status and diagnostic data from the keypad.
A comprehensive list of fault codes and their descriptions.
Best practices for minimizing electrical noise interference.
Details on setting up PLC programs using configuration parameters.
Descriptions of monitor parameters for viewing drive status and values.
Key technical specifications for the VS1GV drive.
Detailed list of Level 1 parameters with factory and user settings.
Detailed list of Level 2 parameters with factory and user settings.
Essential safety warnings and precautions for installation and operation.
Step-by-step guide for initial system setup and basic operation.
Essential steps for properly grounding the drive for safety and performance.
Overview of terminal connections for the control board's I/O.
Description of the keypad layout, buttons, and display elements.
Guidance on tailoring drive parameters for specific applications.
Accessing and interpreting the drive's event log for fault analysis.
Viewing system status and diagnostic data from the keypad.
A comprehensive list of fault codes and their descriptions.
Best practices for minimizing electrical noise interference.
Details on setting up PLC programs using configuration parameters.
Descriptions of monitor parameters for viewing drive status and values.
Key technical specifications for the VS1GV drive.
Detailed list of Level 1 parameters with factory and user settings.
Detailed list of Level 2 parameters with factory and user settings.
General| Type | Variable Frequency Drive |
|---|---|
| Horsepower | 1 HP |
| Input Voltage | 200-240 VAC |
| Output Voltage | 0-240 VAC |
| Phase | 1 Phase |
| Enclosure | NEMA 1 |
| Frequency | 50/60 Hz |
| Overload Capacity | 150% for 60 seconds |
| Control Method | V/Hz |
To Next Page
