Balluff BIS C-6002 User Manual

73
73
english
BIS C-6002-019-_ _ _-03-_ _ _
Balluff Identification System
Type C Read/Write System
Hardware Type
6002 = plastic housing, PROFIBUS-DP
Software-Type
019 = PROFIBUS-DP
Read/Write Head / Adapter
000 = no read/write head
651 = with read/write head Type 651 (with circular antenna on top)
652 = with read/write head Type 652 (with circular antenna on front)
653 = with read/write head Type 653 (with rod antenna)
650 = adapter with two connections for external read/write heads BIS C-3_ _
(except BIS C-350 and -352)
654 = adapter with one connection for external read/write heads BIS C-355/_ _S92
with cable BIS C-520-...
655 = adapter with 4 connections for external read/write heads BIS C-3_ _
(execpt BIS C-35_)
670 = adapter with one cable connection for an external read/write head
BIS C-350 or BIS C-352)
Interface
03 = bus versions
User Connection
KL2 = terminal block via 2 x PG 11 and 1 x PG 9 cable fittings
ST11 = Connector version X1, X2, X3 (2× male 5-pin, 1× female 5-pin)
Ordering Code
BIS C-6002
Ordering Information
C60_2-019_818217_0806-e.p65
74
english74
Type Ordering code
Connector for X1 BKS-S 79-00
for X2 BKS-S103-00
for X3 BKS-S105-00
Protective cap for X3 BKS 12-CS-00
Termination for X3 BKS-S105-R01
Protective cap for Head 1, Head 2 BES 12-SM-2
Accessory for ST11
BIS C-6002
Ordering Information

Balluff BIS C-6002 Specifications

General

Brand	Balluff
Model	BIS C-6002
Category	Computer Hardware
Language	English