Balluff BIS C-6002 User Manual

1
Electronic Identification Systems BIS
Processor BIS C-60_2
Profibus DP
Manual
Deutsch – bitte wenden!
C60_2-019_818217_0806-e.p65
2
No. 818 217 D/E • Edition 0806
Subject to modification.
Replaces edition 0608.
Balluff GmbH
Schurwaldstrasse 9
73765 Neuhausen a.d.F.
Germany
Phone +49 7158 173-0
Fax +49 7158 5010
balluff@balluff.de
www.balluff.com

Balluff BIS C-6002 Specifications

General

Category	Computer Hardware
Operating frequency	13.56 MHz
Protection class	IP67
Output Type	NPN or PNP
Switching Distance	2 mm
Connection Type	Connector
Operating Temperature	-25°C to +70°C

Summary

Safety Considerations

Approved Operation

Ensures system is used for intended purpose in industrial environment.

Installation and Operation

Installation by trained personnel, follow wiring diagrams, care with connections.

Use and Checking

Adhere to safety regulations, prevent hazards, regular testing.

Fault Conditions

Take system out of commission if not working properly.

BUS Interface: PROFIBUS-DP

Communication with the Host System

Communication is via PROFIBUS-DP, involving master and slaves.

Function Description: Communication with the Processor

Basic Procedure

Describes the fixed protocol sequence for communication jobs.

Function Description: Input and Output Buffers

Input and Output Buffers

Fields for commands and data between BIS C-60_2 and host system.

Function Description: Input and Output Buffers (Continued)

Input and Output Buffers (continued)

Example of buffer distribution for two read/write heads.

Function Description: Output Buffer Configuration

Configuration of the Output Buffer

Explains the last byte as a 2nd bit header.

Description of Output Buffer

Details subaddresses, bit names, and their meanings.

Function Description: Output Buffer Details

Function Description: Output Buffer Specifications

Function Description: Output Buffer Parameters

Description of Output Buffer (continued)

Details number of bytes and 2nd bit header configurations.

Function Description: Input Buffer Configuration

Configuration of the Input Buffer

Explains the last byte as a 2nd bit header.

Description of Input Buffer

Details subaddresses, bit names, and their meanings.

Function Description: Input Buffer Details

Function Description: Input Buffer Error Codes

Function Description: Input Buffer Data

Description of Input Buffer (continued)

Continues listing error codes and data descriptions.

Function Description: Parametering the BIS C-60_2 Processor

Parameters, Overview

Discusses user parameter bytes and their functions.

Function Description: Parametering Bytes

Parametering Bytes User-Parameter Bytes

Details the use of 6 user parameter bytes for configuration.

Function Description: Parametering Bytes (Continued)

Function Description: Parametering Bytes Specifications

Parametering Bytes User-Parameter Bytes (continued)

Specifies input/output buffer settings and buffer size limits.

Function Description: Processing Data Carriers

Reading and Writing

Describes the sequence for read/write jobs with data carriers.

Function Description: Processing Data Carriers Modes

Reading and Writing in Dynamic Mode

Processor accepts/stores jobs even without data carrier.

Reading and Writing with Simultaneous Data Transmission

Discusses data transmission during read/write operations.

Function Description: Mixed Data Access

Mixed Data Access

Storing and reading mixed data from data carriers.

Function Description: Mixed Data Access Details

Mixed Data Access (cont.)

Shows program structure and EEPROM replacement.

Function Description: Data Carrier Program Operations

Read from Data Carrier with Program

Command to read program records from data carrier.

Write to Data Carrier with Program

Command to write program records to data carrier.

Copying from Head 1 to Head 2

Copy data from Head 1 to Head 2.

Function Description: CRC Initialization

CRC Initialization

Initializes data carrier for CRC check, error detection.

Function Description: Examples for Protocol Sequence

Example No. 1: CRC Initialization

Initializes data carrier for CRC_16 data checking.

Function Description: Protocol Sequence Examples

Example No. 1 (continued)

Continues protocol sequence for initializing data carrier.

Example No. 2: Reading Data

Reads data from data carrier with 32 byte block size.

Example No. 3: Reading Data with Simultaneous Transmission

Example No. 3 (continued)

Example No. 4: Reading Data with Error

Example No. 5: Reading Data with Error and Simultaneous Transmission

Example No. 6: Reading Data with Error and Simultaneous Transmission

Example No. 7: Writing Data

Example No. 8: Copying Data

Example No. 8 (continued)

Example No. 9: Auto-Read Address Assignment

Example No. 10: Storing Mixed Data Access Program

Example No. 10 (continued)

Example No. 11: Using Mixed Data Access Program

Example No. 12: Using Mixed Data Access Program

Example No. 13: Setting Ground State

Read/Write Times

Read Times in Static Mode

Write Times in Static Mode

Read/Write Times (Continued)

Read Times in Dynamic Mode

LED Display

Function Displays on BIS C-60_2

BIS C-6002 Opening the Processor

Opening the Processor

BIS C-6002-KL2: Installing Connection Cables

Make Connections on the BIS C-6002 Processor

BIS C-6002-KL2: Interface Information / Wiring Diagrams

Wiring Diagram for Integrated Head

Wiring Diagram for Adapter BIS C-650

Wiring Diagram for Adapter BIS C-670

BIS C-6002-ST11: Interface Information / Wiring Diagrams

PROFIBUS-DP Bus Cable and Interfaces

Wiring Diagram for ST11 Processor with Adapter BIS C-650

Wiring Diagram for ST11 Processor with Adapter BIS C-654

BIS C-6002-655-03-ST11: Interface Information / Wiring Diagrams

Wiring Diagram for BIS C-655 Adapter (2x2 Heads)

BIS C-6002: Changing the EEPROM

Changing the EEPROM in the BIS C-6002 Processor

BIS C-6002: Technical Data

Connections KL2 and ST11

BIS C-6002: Technical Data (Continued)

BIS C-6002: Ordering Information

Ordering Code Structure

BIS C-6022: Mounting Processor

Mounting the BIS C-6022 Processor

BIS C-6022: Opening the Processor / Interface Information

Opening the BIS C-6022 Processor

BIS C-6022 Interfaces

BIS C-6022: Interface Information / Wiring Diagrams

PROFIBUS-DP Wiring

PROFIBUS-DP Bus Cable Wiring

BIS C-6022-ST10: Interface Information / Wiring Diagrams

Wiring Diagram for ST10 Processor

BIS C-6022-ST14: Interface Information / Wiring Diagrams

Wiring Diagram for ST14 Processor

BIS C-6022: Changing the EEPROM

Changing the EEPROM in the BIS C-6022 Processor

BIS C-6022: Technical Data

Dimensions, Weight, Operating Conditions, Enclosure

Connections ST10 and ST14

Electrical Connections

BIS C-6022: Technical Data (Continued)

Electrical Connections (continued)

Function Displays

BIS C-6022: Ordering Information

Ordering Code and Accessories