Need help?Do you have a question about the Bambu Lab P1S-Combo and is the answer not in the manual?
General| Filament Diameter | 1.75 mm |
|---|---|
| Bed Leveling | Automatic |
| Extruder Type | Direct Drive |
| Max. Nozzle Temperature | 300°C |
| Enclosure | Yes |
| AMS | Yes |
| Heated Bed | Yes |
| Camera | Yes |
| Power Requirements | 100-240V AC, 50/60Hz |
| Build Volume | 256 x 256 x 256 mm |
| Nozzle Diameter | 0.4 mm |
| Print Speed | 500 mm/s |
| Connectivity | Wi-Fi, USB |
| Supported Materials | PLA, ABS, PETG, TPU |
| Technology | FDM |
| Max. Bed Temperature | 100 ℃ |
| Display | Color Touchscreen |
| Dimensions | 389 x 389 x 458 mm |
Advice against using soft filaments like TPU or damp PVA in the AMS to prevent issues.
Visual guide to the main components of the 3D printer, including tool head and ports.
Diagram identifying AMS components like buckles, cable interfaces, and filament outlets.
Details and images of all accessories provided with the Bambu Lab P1S-Combo printer.
Instructions on how to safely remove the AMS unit and its cushioning from the printer.
Guide to connecting PTFE tubes and Bambu Bus cables for AMS setup.
Instructions for attaching the spool holder to the printer using screws.
Procedure for unlocking the hot bed and connecting the screen assembly.
Steps to bind the printer with your Bambu Lab account via the Bambu Handy app.
Guide on loading filament into the AMS and initiating the first print job.
Instructions for obtaining and logging into the Bambu Studio software.
Process for slicing 3D models and sending them to the printer via Bambu Studio.
How to monitor and control the printing process remotely using Bambu Studio.
Details on Body, Toolhead, Heatbed, Speed, Cooling, and Supported Filament.
Information on physical dimensions, electrical requirements, software, Wi-Fi, and Bluetooth.
Information on accessing the Bambu Lab Wiki for tutorials and support.
Methods for creating support tickets via the official website or Bambu Handy App.
To Next Page
