Need help?Do you have a question about the Bambu Lab X1-Carbon and is the answer not in the manual?
General| Build Volume | 256 x 256 x 256 mm |
|---|---|
| Max Print Speed | 500 mm/s |
| Filament Diameter | 1.75 mm |
| Technology | Fused Deposition Modeling (FDM) |
| Feeder System | Direct Drive |
| Max Nozzle Temperature | 300°C |
| Max Bed Temperature | 120°C |
| Display | 5-inch Touchscreen |
| Dimensions | 389 x 389 x 457 mm |
| Nozzle Diameter | 0.4 mm (default), swappable |
| Supported Materials | PLA, PETG, TPU, PA, ABS, PC |
| Chamber Temperature | Up to 60°C |
| Camera | Built-in |
To Next Page
