Need help?Do you have a question about the Bambu Lab A1 with AMS lite and is the answer not in the manual?
General| Build Volume | 256 x 256 x 256 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Max. Hot End Temperature | 300 °C |
| Max. Bed Temperature | 100 °C |
| Print Speed | up to 500 mm/s |
| AMS Lite | Yes |
| Print Technology | FDM |
| Number of Colors (AMS Lite) | 4 |
| Weight | 10 kg |
| Supported Filaments | PLA, PETG, TPU |
| Connectivity | Wi-Fi, USB |
| Supported File Formats | STL, 3MF |
| Display | Touchscreen |
| Power Requirements | 100-240V, 50/60Hz |
| Layer Resolution | 0.1-0.4mm |
To Next Page
